Insulating and thermal paints promise warmer walls from a tin. Heat Halo is a different thing: a thin thermal coating built up to a minimum 2mm wet film, installed by trained teams, finished with a plaster skim and independently tested in a real home. Here's an honest comparison, including when paint might be all you need.
Insulating and thermal paint
Insulating paints, often called thermal paints, are paints with additives intended to make a wall feel warmer and reduce condensation. They're usually rolled or brushed on like ordinary emulsion, often as a DIY job.
They appeal for obvious reasons: they're cheap, quick and don't take up any room. The difficulty is evidence. A coat of paint is typically a fraction of a millimetre thick, and claims about heat loss or bills often rest on the manufacturer's own data or laboratory tests rather than measurements on a real wall in a real home.
How Heat Halo is different
Heat Halo sits between paint and insulation boards: far thinner than boards, so you keep your room space, but built and tested as a thermal system rather than a decorative finish.
Heat Halo is spray-installed to a minimum 2mm wet film, then finished with a plaster skim. Film thickness is controlled and checked, not left to how many coats someone rolls on.
Every wall starts with a survey, and installation is carried out by trained Heat Halo installation teams with QA sign-off.
Build Test Solutions Ltd monitored a treated wall and an untreated control wall in an occupied property under BS ISO 9869-1. The treated wall lost 16% less heat. See the test results →
Every installation comes with a 10-year installation-backed system guarantee, covering the installed system rather than just the product in the tin.
Side by side
Insulating paints vary, so check the details of any product you're considering. This is how they typically compare.
| Insulating paint | Heat Halo | |
|---|---|---|
| What it is | A paint containing additives, applied like ordinary paint | An installed thermal system, built up to a minimum 2mm wet film and finished with a plaster skim |
| Thickness | Typically a fraction of a millimetre per coat | Minimum 2mm wet film, plus the plaster skim |
| Who applies it | Usually DIY or a decorator | Trained Heat Halo installation teams, after a survey |
| Independent evidence | Often the manufacturer's own data or laboratory tests | Tested in a real home by Build Test Solutions Ltd under BS ISO 9869-1 |
| Measured result | Varies by product – check what was measured, and where | 16% less heat loss through the tested wall; U-value 0.69 → 0.62 W/m²K.About 25% improvement projected for a typical older solid wall (2.0 W/m²K). See the maths →Coated surface 2–3°C warmer than the wall beneath it, from BTS's engineer's analysis. How we measured this → |
| Finish | A painted surface | Plaster skim, then decorated like any other wall |
| Guarantee | Usually a product warranty – varies | 10-year installation-backed system guarantee |
| Cost | Low – materials only | Single wall up to 12m² £3,295 inc VAT; each further wall in the same visit £1,495. Plaster skim and decoration quoted separately |
Being honest
Not sure which applies to you? Check if your home qualifies → or see what it costs.
Questions
No. Heat Halo is an installed thermal system, finished with a plaster skim, built up to a minimum 2mm wet film by trained Heat Halo installation teams. It is not sold as a paint, and it is not a DIY product.
Some insulating paints can make a wall surface feel slightly less cold to the touch. Claims about cutting heat loss or heating bills are harder to check, because they often rest on the manufacturer's own data or laboratory tests rather than measurements on a real wall. If you are comparing products, ask for an independent in-situ test under BS ISO 9869-1.
A coat of paint is typically a fraction of a millimetre thick. Heat Halo is built up to a minimum 2mm wet film and then finished with a plaster skim. That is still thin enough to avoid the floor-space loss of insulation boards.
Yes. Once the plaster skim is finished, the wall is decorated like any other wall in your home.
Yes. Insulating paint is usually bought as a DIY material. Heat Halo is an installed system with a survey, installation, QA sign-off and a 10-year installation-backed system guarantee. A single problem wall up to 12m² is £3,295 including VAT, and each further wall in the same visit is £1,495. The plaster skim and decoration are quoted separately.
Next Step
Tell us about your home and the walls that are cold, damp or mouldy. We'll confirm whether Heat Halo is suitable and what it would cost.
Check if your home qualifies