Awaab's Law – For Housing Associations, Local Authorities & ALMOs

Cold walls, damp and mould under Awaab's Law: stopping it coming back

Awaab's Law sets fixed deadlines for social landlords to investigate and make safe significant damp and mould. But on cold solid walls, mould that is cleaned and treated often returns the next winter, because the wall surface is still cold enough for condensation to form. Heat Halo is a 2mm spray-installed thermal coating that improves the thermal performance of the specific wall causing the problem. It is installed in three days, residents do not need to move out, and the Cold Wall Pilot is £2,995 per wall.

What Awaab's Law requires

Fixed timescales for damp and mould.

Since 27th October 2025, social landlords in England must meet legal deadlines when they become aware of a potential hazard.

From 30th November 2026: excess cold

The same timescales extend to further hazards where they present a significant risk of harm, including excess cold.

10 working days

To investigate a potential significant damp and mould hazard.

3 working days

To give the tenant a written summary after the investigation concludes.

5 working days

To complete safety work once a significant hazard is identified.

24 hours

To investigate and make safe emergency hazards.

Where Heat Halo fits

The longer-term fix for walls where mould keeps coming back.

Heat Halo isn't an emergency make-safe measure, and it doesn't replace mould treatment or ventilation. It's the longer-term fix for the cause: walls where mould keeps coming back because the surface stays cold.

That makes it relevant to the further works that follow an Awaab's Law investigation, and to cutting repeat complaints on the same properties.

From 30th November 2026, Awaab's Law extends to excess cold: whether a home can keep a healthy indoor temperature. Cold solid walls make that harder. In independent testing, Heat Halo improved the tested wall's U-value from 0.69 to 0.62 W/m²K, so it is one measure landlords can use on cold walls. It does not on its own guarantee compliance.

The cause

Why mould keeps returning on solid walls.

When warm, moist room air meets a cold enough wall surface, condensation forms, and mould follows. Cleaning and redecorating deal with the symptom. The wall stays cold, so the cycle repeats.

The usual culprits

Gable walls, end terraces, corner bedrooms and north- or east-facing walls in solid-wall homes.

The repeat cycle

Clean it. Treat it. Paint it. Then wait for winter and do it all again – unless the wall itself changes.

Independent Performance Evidence

What the evidence shows.

BTS fitted each room, treated and control, with two heat flux plates, two internal surface temperature sensors and room and external air temperature sensors. On the treated wall, Plate 1 was fixed on the surface of the coating and Plate 2 beneath it. Monitoring ran for 18 days: 6 days before treatment and 9 days after, analysed under BS ISO 9869-1.

Occupied homes

Residents do not need to move out.

  • One wall, up to 12m², installed in three days.
  • Residents do not need to move out.
  • 2mm thick, so there's no meaningful loss of room space.
  • Installation only: your existing contractors prepare the wall beforehand and complete the finishing works.

Evidence for your records

Documented, wall by wall.

Each treated wall comes with QA documentation, installation records and thermal monitoring readings that you can use in your damp and mould case files and for internal sign-off.

Questions

Awaab's Law and Heat Halo.

Does Heat Halo make us Awaab's Law compliant?

No single product does. Compliance depends on meeting the investigation and repair timescales. Heat Halo helps by dealing with a common cause of recurring mould, and gives you a documented, evidenced intervention for each wall.

Does Awaab's Law cover excess cold?

Yes, from 30th November 2026. The Awaab's Law timescales extend to further hazards where they present a significant risk of harm, including excess cold. Heat Halo improves the thermal performance of cold solid walls, so it is one measure landlords can use. It does not on its own guarantee compliance.

Which walls should we start with?

The ones that keep coming back: repeat complaints, gable walls, corner bedrooms and solid walls with a mould history.

How do we start?

Most providers begin with 5 walls (£14,975), then scale up based on the monitoring results. Expanded pilots and programmes are £3,195 per wall. All prices are per wall up to 12m², exclude VAT and are fixed for two years from contract, then reviewed.

More questions answered →

Next Step

Discuss the Cold Wall Pilot for your stock.

Tell us about the properties and walls you're dealing with. We'll confirm suitability, outline a programme structure and provide the full technical pack.

Discuss the Cold Wall Pilot